Thunder Viewer
Blog

Second Life on Mobile · · 10 min read

Second Life Voice Not Working? Fixes for 2026

Illustration of a headset with a microphone on a desk beside an open window, with broken violet sound waves reconnecting into one gold wave

If your Second Life voice is not working in 2026, the cause is usually one of seven things, and the first one catches more people than all the others: your viewer is too old for the new voice system. After that come voice switched off in preferences, the wrong microphone or speakers selected, a blocked microphone permission in Windows or macOS, a muted headset, a parcel with voice turned off, and a network that blocks real-time traffic. Work down the checklist below and most people are talking again in five minutes.

A quick bit of context: Second Life moved all of its voice to WebRTC in 2026, replacing the old Vivox system. Our explainer on Second Life's move to WebRTC voice covers what changed and why. This page is only about getting your voice back.

The quick checklist

Try these in order. Each has its own section below.

  1. Is your viewer new enough for WebRTC voice? Old builds simply cannot connect any more.
  2. Is voice enabled in Preferences? Turn it off and on again while you are there.
  3. Are the right input and output devices selected? "Default" is not always the device you think it is.
  4. Has your operating system or browser blocked the microphone?
  5. Is your headset muted, or are you on push-to-talk?
  6. Does the parcel or region allow voice? Many do not.
  7. Is a firewall, VPN or work network blocking it?

If you can hear people but they cannot hear you, or the other way round, jump to the two sections near the end that split those cases.

Second Life voice not working after the WebRTC switch: update your viewer

This is the big one. Linden Lab's WebRTC voice chat FAQ says that as of 2026 all regions use WebRTC voice, and that viewers that do not support WebRTC "will no longer be able to connect to the voice service." WebRTC finished rolling out across the main grid on 5 May 2026. If you kept an old viewer build, voice stopped for you then.

The fix:

One side effect worth knowing: voice morphs were a Vivox feature, and the FAQ confirms they do not work on WebRTC. If your voice used to come out through a morph, that setting does nothing now.

Voice is switched off in Preferences

In the official viewer and in Firestorm, voice settings live under Preferences, Sound & Media, Voice. Make sure the option to enable voice is ticked.

While you are there, do the oldest fix in the book on purpose: untick voice, click OK, then tick it again. Linden Lab's own release notes for the first WebRTC viewer said exactly this: "If you do have issues with voice, disable and re-enable voice." It forces a fresh voice connection.

The wrong input or output device is selected

The voice panel has separate drop-downs for your input (microphone) and output (speakers or headset). Two traps show up again and again in Linden Lab's bug tracker:

A detail from Linden staff that trips people up: voice output is muted while the device settings panel is open, and changes apply only when you click OK. Close the panel before you decide it did not work.

The microphone permission is blocked

Your operating system can silently refuse the microphone to your viewer.

Windows 11: open Start, Settings, Privacy & security, Microphone. Turn on Microphone access, Let apps access your microphone, and Let desktop apps access your microphone. Second Life viewers are desktop apps, so that last switch matters most. Microsoft documents these switches on its microphone permissions page.

macOS: choose Apple menu, System Settings, Privacy & Security, Microphone, and switch on your viewer. If the viewer is not in the list, quit and relaunch it so it asks again.

In a browser: if you use voice through a web client, the browser asks for the mic per site. If you clicked Block once, the browser may never ask again. Click the icon left of the address bar, allow the microphone, and reload.

Headset mute, push-to-talk and the Speak button

The parcel or region has voice off, or voice is private

Land owners decide whether voice is allowed on their land. In the About Land window, the Sound tab has an Enable Voice setting, and there is a Restrict Voice to this parcel option. Linden Lab's help describes the second one plainly: you cannot use spatial voice with people standing outside the parcel, but private voice calls still work. Estate owners can also switch voice off for a whole region, in which case the parcel options are greyed out.

So if you can talk at home but not at a club, or you can see someone two metres away but cannot hear them across a parcel line, this is probably the reason. That is the land owner's choice, not a fault on your side. Teleport to a place with voice on to confirm your setup works.

Also remember range: spatial voice fades out past about 50 metres. Someone on the far side of a region is simply out of earshot.

A firewall, VPN or corporate network blocks voice

WebRTC voice is real-time audio, and it prefers UDP, the fast, connectionless kind of network traffic that strict networks like to block. If voice fails everywhere, on every parcel, with a working mic, suspect the network:

Can hear but not speak

People sound fine, but nobody hears you. In order:

  1. Check the Speak button and push-to-talk (above).
  2. Check the OS microphone permission for your viewer.
  3. Pick your microphone by name in the voice input drop-down instead of Default.
  4. If your viewer shows a microphone level indicator in its voice settings, watch it while you talk. No movement means the viewer gets no sound from that device.
  5. Make sure someone has not muted you. If one person cannot hear you but everyone else can, they may have muted or blocked you, or turned your volume to zero on their side.

Can speak but not hear

People react to what you say, but you hear nothing. In order:

  1. Check the voice output drop-down. Pick your headset by name.
  2. Check your system volume mixer and make sure the viewer is not turned down or muted there.
  3. Check whether you muted someone, or lowered their volume, from their avatar or the nearby voice list.
  4. If you use a studio or multi-channel interface, set it to 48 kHz and test with built-in speakers or plain headphones.
  5. Go somewhere busy with voice. A quiet parcel may just be quiet.

For a clean test, Linden Lab staff point residents to the Voice Echo Canyon region, where you hear your own voice played back. If you hear yourself there, your mic and output are working and any remaining problem is about where you are or who you are with.

Echo, crackle and other voice problems

Firestorm voice not working

Everything above applies to Firestorm, with a few Firestorm-specific points:

Voice in a browser: skipping the driver problems

A lot of the fixes above exist because a desktop viewer has to find your sound devices, get past your OS permissions, and be a recent enough build. Thunder Viewer takes a different route: it is a browser-based Second Life client, and its spatial voice runs over WebRTC directly in the browser, with no plugin and nothing to install. Your browser handles the headset and microphone permission, as it does for any video call.

It works in a phone browser too, which helps when your desktop setup is the problem and you just want to talk (our guide to Second Life on mobile covers every way to use Second Life from a phone). Our guide to Second Life voice on your phone walks through joining voice step by step. And if live voice is not what you need, you can send a Second Life voice message in an IM that plays on any viewer.

FAQ

Why is my Second Life voice chat not working?

The most common reason in 2026 is a viewer too old for WebRTC voice, which every region now uses. After that, check that voice is enabled in Preferences, that the right devices are selected, that your OS allows the microphone, and that the parcel allows voice.

Why is my Second Life voice not working in Firestorm?

Update to the current Firestorm release first, since older builds cannot connect to WebRTC voice. Then check Preferences, Sound & Media, Voice, and pick your devices by name. If calls from the Conversations window will not start, start them from the People floater or the avatar's menu instead.

Why do I have no voice in Second Life at all?

If voice is missing everywhere, it is usually your viewer version, voice switched off in Preferences, or a network blocking real-time traffic. If it is missing only in some places, those parcels or regions have voice turned off.

How do I fix Second Life voice issues like echo?

Wear headphones so your mic does not pick up your speakers, and make sure echo cancellation is on in the Voice preferences. If it persists, toggle voice off and on.

How do I test my voice in Second Life?

Visit the Voice Echo Canyon region, which plays your voice back to you. If you hear yourself, your mic and speakers are fine.

If you would rather talk without installing or updating anything, Try Thunder Viewer free.